Digital Twin technology for decarbonising any built environment.
Integrated analysis tools for the design & retrofit of buildings.
Create a sustainable masterplan for a city, community or campus.
Optimise building performance at an individual level or across a portfolio.
Analyse the feasibility of energy network decarbonisation strategies
A customisable range of operational dashboards, portfolio management and community engagement tools.
Exceptional room & zone loads analysis for building & HVAC design.
Predict building energy consumption, CO2 emissions, peak demands, energy cost & renewable production.
All Consultancy Projects
Acting as simulation consultants IES Consulting helped achieve a 50% reduction in Energy Consumption.
The Office of Public Works is responsible for the development of a series of new central government buildings, which form part of the Irish Government’s decentralisation strategy. Taking the opportunity to lead the way in the design of ‘green’ buildings in Ireland, the new OPW HQ is the flagship project and will house 275 staff.
Acting as simulation consultants, IES Limited has been involved right from the initial concept, using the building performance modelling capabilities of its Virtual Environment software to help in the development of the design. The software can compare and contrast how different design choices affect the performance of a wide range of elements affecting how sustainable and comfortable the building is; such as thermal, airflow and lighting performance, and energy/CO2 consumption. The involvement of IES from the earliest stages meant a structured simulation approach could be taken, encompassing all the latest cutting edge simulation techniques available within the IES Virtual Environment. For example, external wind studies, thermal, airflow and lighting studies.
As a flagship low energy building, OPW required a significant reduction in energy consumption when compared to a traditionally designed government headquarters. The structured simulation strategy allowed IES to use appropriate tools (external wind and thermal studies) at the early to mid design stages to help determine the optimum design solution for the building, whilst also ensuring exceptional comfort standards.
Ten key design features that significantly enhanced the thermal performance of the building were identified through work undertaken by IES.
1. Triple opening facade strategy
2. Night cooling
3. Exposed mass
4. Improved glazing to façade ratio
6. Enhanced shading system
7. Solar control glazing system
8. Intelligent placement of airflow obstructions such as cellular offices
9. Identification of localised cooling requirements
10. Atrium independent solution created for the minister’s office.
This configuration was then validated and further optimised using internal CFD studies to predict micro air movement and Radiance studies to predict daylight distribution within the atrium and open plan office areas.
The design was found to be effective during summer at moving air and therefore heat gains away from the perimeter of the building and into the atrium, achieving a typical uniform temperature distribution in the region 23/24oC across the office floorplate. While during winter, underfloor heating in the atrium in conjunction with a high level extract system generated a positive flow, promoting uniform temperature distribution and minimising the influence of any drafts on occupants neighbouring the atrium.
The building was also shown to be successful at using all available natural daylight. With overcast conditions producing natural lighting levels with a daylight factor between 1-3 and a good distribution across the working plane, and sunny conditions producing natural daylighting levels in the region of 450-500 lux.
The early stage IES Virtual Environment analysis identified that the initial thermal configuration was unable to maintain comfort conditions in line with current CIBSE best practice guidelines:
The structured IES Virtual Environment model was invaluable in determining the optimum route from ‘concept’ configuration to ‘final’ configuration ensuring that inside dry resultant temperatures of 25oC were only exceeded for 41 hours on average. The initial scheme exceeded this for an average of 416 hours.
Finally, a holistic analysis of energy performance was undertaken, taking thermal, lighting and airflow performance into consideration. The simulation calculated that the annual energy consumption for this building will be 185 kWh/m2/year, representing an annual energy saving of 59.4% over a type 4 ECON 19 building and 48.5% over an equivalent notational building. Associated reductions in CO2 emissions have also been estimated.
“The OPW has really taken on board the capabilities of our Virtual Environment software,” said lead IES Consultant on the project Vincent Murray. “We have been able to work closely with the design team right from the early stages to ensure that maximum impact on energy consumption was achieved. All too often performance modelling is carried out after many key design decisions have been made, limiting the scope for performance enhancing alterations.”
Cover Photograph by Ines Billings Photography. www.inesbillings.com