Trial / Demo
Every Revit-to-energy project wastes time rebuilding and fixing models after export. IES Sync for Revit is here to give you that time back.
The handover from Revit to energy analysis has always been a weak point in the workflow. File exports lose data, geometry arrives broken, voids and plenums aren't handled correctly. And before a single simulation runs in IES VE, you’ve spent a day rebuilding a model that already existed elsewhere. IES Sync for Revit is built to close that gap, for good.
50% less time on every handover
Compared to a manual workflow with a reference model, IES Sync reduces handover time by a minimum of 50%. Giving you more time to concentrate on performance analysis or HVAC loads/sizing calculations.
Native, not a bridge
IES Sync connects Revit directly to IESVE through a new native shared data intelligence layer. Not a third-party geometry bridge. Not a file format that drops half your model in translation. A direct connection, built by IES, on the platform your analysis already runs on.
At launch it carries geometry, including voids and air plenums, exactly where file-based methods fail most often. Data packs follow in Phase 2, with a Locations and Room Groupings, and Constructions & Materials packs likely to delivered first.
Five transparent steps. No surprises.
The workflow is guided end-to-end:
1. Identify floor plans - select the Revit geometry you want to analyse.
2. Detect rooms & spaces - IES Sync maps and tags your model.
3. Generate analytical model - build the energy geometry automatically.
4. Review & validate - check the model in the IES Sync interface.
5. Export to IES VE - ready for compliance, loads, sizing and analysis.
With validation checkpoints at every stage, it means you get clear success or failure feedback as you go, not after import, when it's too late. So what arrives in IES VE is ready to further refine as necessary, with clarity on what needs attention.
IES Sync for Revit is unveiled at Autodesk University, Las Vegas, Booth #2218, 15-17 September, join us and see it live in action. Or register your interest here, or you can sign-up for the post launch product demo.
